Panasonic AKT4112100: KT4 Specs & Datasheet

The Panasonic AKT4112100 is a KT4 temperature controller designed for panel-mounted temperature and process-control applications. It operates on a 100–240 V AC supply, accepts a multi-input sensor signal and provides a non-contact voltage output for driving an external solid-state relay (SSR).

Panasonic’s product record lists the AKT4112100 as discontinued. If you are maintaining existing equipment or sourcing a replacement, verify the exact model, condition, compatibility and warranty before ordering.

AKT4112100

AKT4112100

شراء AKT4112100 من متجر ATCS ↗

اسأل عن AKT4112100 على واتساب ↗

راجع السعر والتوافر في صفحة المنتج، أو تواصل لتأكيد موعد التوريد قبل إتمام الطلب.

Panasonic AKT4112100 specifications

Specification Details
Manufacturer Panasonic
Series KT4
Product type Temperature/process controller
Power supply 100–240 V AC
Sensor input Multi-input
Control output Non-contact voltage output for an external SSR
Alarm output One relay contact output
Control methods On/off and proportional (PID)
Communications Not available
Heating/cooling control Not available
Heater burnout alarm Not available
Controller size 48 × 48 × 95 mm
Panel cutout 45 × 45 mm
Operating temperature 0–50°C
Product status Discontinued

Panasonic identifies the input as multi-input, while the supplied datasheet lists support for thermocouple, RTD, DC voltage and DC current inputs. The usable measurement range depends on the selected sensor or input type, so confirm it against the application before installation.

توفره في جميع الفروع أو إمكانية الاستلام الفوري.

شراء AKT4112100 من متجر ATCS ↗

اسأل عن AKT4112100 على واتساب ↗

How the KT4 controller works

The AKT4112100 reads a temperature or process signal from a compatible sensor and uses the selected control method to regulate the process. Its non-contact voltage output is intended to drive an external SSR; it is not the alarm relay output.

The separate alarm output is a single relay contact. It can be used in a compatible alarm circuit, but the AKT4112100 does not provide a communications function, heating/cooling control or a heater burnout alarm.

What to check before using AKT4112100

Before installing this controller, check the sensor type and input range, the supply voltage, and whether the connected SSR accepts the controller’s output. Confirm that the panel opening matches the required 45 × 45 mm cutout and allow for the controller’s 48 × 48 × 95 mm body size.

Also confirm that the application does not require communications, heating/cooling control or heater burnout detection, since these functions are not available on this model.

Is Panasonic AKT4112100 still available?

Panasonic lists the AKT4112100 as discontinued and does not show a substitute on its product page. Some third-party listings may still show stock, including used or surplus units. Check the seller’s stated condition, warranty and return policy, and verify compatibility before purchasing.

For a replacement, compare the sensor input, output type, alarm requirements, panel dimensions and control functions against the existing installation. Do not select an alternative by dimensions or part number alone.

Frequently asked questions

What does the AKT4112100 control output do?

It provides a non-contact voltage output intended to drive an external SSR. The separate alarm output uses one relay contact.

Does the AKT4112100 support PID control?

Yes. The supplied datasheet lists on/off and proportional (PID) control methods.

Does this model have RS-485 or another communication function?

No. Panasonic’s product specifications show that the AKT4112100 has no communication function.

Is the AKT4112100 discontinued?

Yes. Panasonic identifies the KT4 AKT4112100 as discontinued. Confirm current stock, product condition and warranty directly with the seller.

مقالات منتجات مرتبطة

المراجع التالية للمقارنة والاطلاع؛ وجودها هنا لا يعني أنها بدائل مباشرة.

المصدر والتواصل

بيانات AKT4112100 لدى الشركة المصنعة · فروع ATCS · الدعم الفني